Half the hum blamed on amps isn't coming from the amp at all. Get the free one-page hum finder: the four-second test, the touch test, how to tell 60 Hz from 120 Hz with the guitar in your hands, and the tube-by-tube check that finds the source. No meter, and the chassis stays closed.

Three quick tests, no tools needed, and you’ll get the likely source, the next check in the book’s order, and the chapter to read.
Unplug the guitar and pull the cable out of the input. If the hum vanishes, the amp is fine, and you just saved yourself a set of tubes.
Hold a chord and turn. Hum that rises and falls is single-coil pickups catching a light, a dimmer, or a transformer nearby, not a fault.
Touching the strings should make the hum drop. If it gets louder, stop: that is a grounding fault, and the checklist tells you why not to play the rig.
Name the hum with one fretted note or a tuner app. The two frequencies come from opposite ends of the amp, so this decides where you look.
Volume to zero, then one preamp tube at a time. Each rung tells you which half of the amp to stop worrying about.
Quiet at home, noisy on stage is usually a ground loop. The three fixes that work, and the one you should never use.
The checklist finds the hum. The book fixes it: the two kinds of hum in depth, filter capacitor replacement with the discharge step you must never skip, tube swaps and biasing, the input jack that leaks ground, preamp noise, and the problems that only show up at gig volume. Tube and solid-state, in plain English, no engineering degree required.
The safety rules, three tools, and the checks for no sound, crackle, and hum. Includes the hum video.
Read the glow, confirm by substitution, and swap tubes without breaking them.
Fixed vs cathode bias, the 70 percent formula, and a target table by tube type.
A different problem with its own free checklist: the no-sound gauntlet and the gig-day kit.
Grab the free one-page hum finder, print it, and work down it with the guitar in your hands.
Send me the checklist →